13.0mm Tube OD 430FR Solenoid Stem With O-Ring
|Terms of Trade:||FOB|
|Min. Order:||1 Bag/Bags|
|Delivery Time:||7 Days|
|Productivity:||10000/set per we|
|Place of Origin:||Ningbo|
|Supply Ability:||10000set per we|
Model No.: BAPC213043001
13.0mm OD 430FR Solenoid Stem With O-Ring
1.Feature and characteristic
1.1,This item use stainless steel seat or brass seat.Two material meet two requirement.Application in different condition depend on the brass/stainless steel's Conductivity, thermal conductivity,service long life or not or even Other factors have effect on the solenoid valve
And the armature/stem have two grooves which to assembly with the solenoid coil or other parts as a connection.The upper groove was used for install rubber such as PTFE,VITON or NBR to improve the sealing ability.
The armature and pentagon seat is welding,so it's really stability and will not decompose by most of the damage which prolong the items' service life.
This welding technology is the most advanced welding technology:Laser solder technology
This solder technology description: Laser welding technology is a technique of fusion welding, which uses a laser beam as an energy source to impact the welded joint to achieve the purpose of welding. It consists of an optical oscillator and a medium placed between the mirrors at the ends of the cavity of the oscillator.
1.2,This item have embed O-Ring seal in the pentagon seat.O-Ring is used for sealing the liquid of the media.Because the embed O-Ring,so Improving the sealing property. And material for O-Ring is NBR. One kind of rubbers which has good resistance to high conductivity ,corrosion and can even adopt the most toughest media such as neutral media/alkaline media/acid media.Even have good resistance to most the organic solvents
NBR: good resistance to mineral oils, vegetable oils, benzene/petrol, ordinary diluted acids and alkaline.
1.3,The plunger and spring are have special feature.Its plunger also have two grooves in the both sides.This shape design not only save the material for us,but also it's the essential part for the plunger.Because Two grooves have a impact on the sealing property and safety and service life.Without this design,when energized or de-energized,this item could not keep the High accuracy/precision and safety.So this design ensure the quality and guarantee the safety. And there is a vent in the plunger,this vent is used in exhausting air when the valve is not powered.Also promise the safety and the accuracy.
1.4,This item' plunger have a different spring design.Its spring is connected with a brass pin.With the brass pin,this design could create a powerful magnetic field in the valve when energized.
So have this powerful electromagnetic force,it's can overcome the spring force.In the open state of the valve,this design could consumer lower power to hold the seal to control the liquid of media flow through the solenoid coil.
1.5,This item is 2/2 way normally closed solenoid stem,could assembly with the 2/2 way solenoid valve.
2/2 way solenoid valve is one type of solenoid valves, there are 2/2 normally open,3/2 normally open solenoid stem
2/2 normally closed solenoid stem have two ports and two position,a input port and a output port.when energized,the solenoid valve is open and the liquid flow,when de-energized,the valve is close and keep the liquid in the right ride of the valve.So It's called 2 way 2 way normally closed solenoid valve
2.What about the detail of dimension
|And our after-sale service|| |
One principle: satisfy the customers and meet the quality
We promise our items quality 100% ,and with good resistance to the air leakage, corrosion,long service life
If you have any question or interested in our other item,contact us we can discuss the problems together and give the best solution for you
|About application|| |
Mainly used with the solenoid coil.
A part of the solenoid valve
Common using in the general industry such as hydraulic ,pneumatic ,car industry and even in the venting machinery.
The solenoid stem is in a wide use in our daily life
3.1,our company located in the port city-Ningbo.
So we have the natural advantage to delivery the goods.
We are the original chines mainland factory and have more than 10 years experiences, solenoid stem ,solenoid jet valve ,solenoid pulse valve is all available
NINGBO BRANDO HARDWARE CO.,LTD
BRANDO is one of leading manufacturers of solenoids, armature assembly, and solenoid valve in China, located in China main sea port city -- NINGBO, the location with high convenience of shipment not only by air but also by ocean.
BRANDO has 4800 square meter workshops and around 50 employees, developed about 10 years from year 2008 by focusing on products quality, design, service, now with good reputation from all over the world and our annual output value increasing yearly by yearly, moreover, more than 90% of annual output value is from exporting brought from our high quality and best customer service. We highly believe to run the company and brand well should keep faith of BEST QUALITY, BEST ATTITUDE, and BEST CUSTOMER SERVICE.
BRANDO`s products range covering solenoid coil, solenoid valve armature assembly, various solenoid valves, fluid medium such like pneumatic, hydraulic, water, hot water, air, steam, gas, oil, chemical liquid and Others. We supply OEM and ODM, all products widely applications for automotive, automation, textile industry, pneumatic , hydraulic, air and water treatment systems and so on.
Model series have such like Q22HD, 2W, 2S, US, 2L, 223, 6014, 0311, 0927, 0955, PU220, PU225, 2P, 2V, VX2120, QX, VX22, VX31/32/33, ZQDF, SCG, CA, DMF, 4V100, 4V200, 4V300, 4V400, VF, VZ, EVR, etc... Any request just feel free to contact our sales team, will response once get message, email or calling.
BRANDO company is approved by ISO9001:2008 system and managed by 5S management, with clean workshop environment and high precision machines and strict operation paperwork procedure to ensure the production well, save delivery time, and reduce any waste to satisfy all clients all over the world.
BRANDO company welcome clients from all over the world, we attend exhibition in many countries, such like America, Europe, Australia, Malaysia, Pakistan, Egypt, New Zealand, Poland, Germany, Korea, India, Indonesia, etc. We highly welcome your visit at our booth or our company.
Quick review of BRANDO products:
- Company Name: NINGBO BRANDO HARDWARE CO.,LTD
- Representative: Lu Jin Jun
- Product/Service: Solenoid Valve Armatures , Solenoid Valve Coils , Pneumatic Solenoid Valves , Pneumatic Cylinders , Pulse Jet Diaphragm Valves , Pneumatic Components
- Capital (Million US $): 1000,000RMB
- Year Established: 2008
- Total Annual Sales Volume (Million US $): US$5 Million - US$10 Million
- Export Percentage: 81% - 90%
- Total Annual Purchase Volume (Million US $): US$1 Million - US$2.5 Million
- No. of Production Lines: 10
- No. of R&D Staff: 5 -10 People
- No. of QC Staff: 11 -20 People
- OEM Services Provided: yes
- Factory Size (Sq.meters): 3,000-5,000 square meters
- Factory Location: Ningbo
- Contact Person: Mr. Brandon Bao
- Tel: 86-0574-83879820
Premium Related Products